Start a Project

Request a Quote.
CAL-TM12-I-M1-C1 LED linear luminaire

Third Generation · TM Acrylic Cover

TM I & TM II Acrylic-Cover Architectural LED Linear Lights

Thickened acrylic covers in two profile sizes and lengths.

TM I and TM II use thickened acrylic covers above aluminium housings. Compare the larger and smaller profile listings by their actual width, height and length, then specify the light appearance and electrical requirements for the installation.

Power
12 W
Protection
IP66 · IK10
Beam Angle
120°
Profile
L1000 × W30 × H62 mm
Model2 models

Project support: Share the model, mounting detail, light requirements and project supply.

Get Project QuoteRequest Technical Documents

Features & Specifications

TM Acrylic Cover Features & Technical Specifications

Profile dimensions and electrical options below follow the selected model.

Thickened Acrylic Cover Profiles

TM I and TM II use thickened acrylic covers over different aluminum profile sizes. The cover construction is shared, while their lengths and cross-sections differ.

Choose the visible profile and complete mounting envelope for the architectural line. The listed power and output belong to the selected model.

White, RGB, RGBW and requested single-color options are shown. Set the required color and control when preparing the project configuration.

Performance & Optics

Power12 W
Maximum Luminous Flux816 lm
Luminous Efficacy68 lm/W
Beam Angle120°

Light & Control

Light ColorWhite / RGB / RGBW / Single colour on request
Color Temperature (CCT)2700 K / 3000 K / 3500 K / 4000 K · other CCTs on request
Control OptionsDMX512 / ON/OFF
Warranty5 years

Mechanical & Electrical

Dimensions (L × W × H)L1000 × W30 × H62 mm
Cover materialThickened acrylic
IP RatingIP66
IK RatingIK10
Input voltage24 V DC
Operating Temperature−40 °C to +50 °C
Housing MaterialAluminium

TM Acrylic Cover OPTICS

TM Acrylic Cover Light Distribution

TM I and TM II use thickened acrylic covers with a nominal 120° beam. White, RGB and RGBW versions are available, with single colours on request.

Selected profile
Thickened acrylic cover · larger profile
Light colour
White / RGB / RGBW / Single colour on request

BEAM GEOMETRY

Beam Diagram

TM Acrylic Cover nominal 120 degree beam diagram Shared optical schematic for TM Acrylic Cover LED linear lights, showing 60 degrees to each side of the centre axis. Profile illustration is schematic. Acrylic cover 60°60° 120° Nominal beam angle

Nominal beam schematic

REFERENCE PHOTOMETRY

Light Distribution Curve

C0–C180C90–C270 Luminous intensity (cd)

TM Acrylic Cover Reference Curve

Full reference polar plot shown for TM Acrylic Cover, including both C-plane curves and the 104.5 degree beam angle at 50 percent peak intensity.

Technical Documents

Technical Documents

Product specifications and technical files for your lighting project.

Product Family Datasheet

TM Acrylic Cover · 2 models

Specifications and dimensions for all models on this product page.

Request Datasheet

Need More Technical Files?

Project-specific documentation

IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.

Request Technical Files

Certificates & Compliance

Browse available certificates and check the product and model scope in each document.

View Certificates

FAQ

TM Acrylic Cover Frequently Asked Questions

Practical questions about installation planning, samples and project specification.

Does a thickened acrylic cover guarantee glare-free lighting?

No such guarantee is established by the supplied data. Visual comfort depends on viewing direction, output and mounting position. Review a sample or the relevant optical information for the actual project.

Can I use the same fixing detail for TM I and TM II?

Do not assume the two profiles share the same fixing arrangement. Request the current drawing for each selected model and check it against the supporting construction.

Should the two models be compared only by their lengths?

No. Compare the full installation envelope, connections and fixing requirements as well. The narrower model still needs sufficient vertical space and access for the installed assembly.

How should the cover appearance be checked before a larger order?

Request a sample with the intended light configuration and review it at the planned viewing distance and mounting position. State any finish or visible joint requirements in the sample brief.

Is a custom length confirmed by the model name?

No. The page shows the current listed lengths. Provide any different length requirement and request confirmation rather than assuming a custom-length option.

PROJECT SUPPORT

Discuss Your TM Acrylic Cover Configuration

Share the selected model, required quantity, installation detail and lighting requirements. Include the supply and control information for a model-specific review.

CURRENT SELECTION · Selected Model: CAL-TM12-I-M1-C1

HELPFUL INFORMATION

  • Complete model code and required quantity
  • Light colour and optical requirements
  • Available supply and control requirement
  • Mounting detail, run length and cable route
  • Project drawing or reference photograph

PROJECT REVIEW

Our team will review your model, requested configuration and installation requirements, then follow up with the available options.

Request a Quote.