Free-Bending LED Neon Flex
MODELS
NF01010 · NF01616 · NF02020R · NF05025
10–25 W/mWhite configurations
10 × 10 mm / 16 × 16 mm / 20 × 20 mm (rounded) / 50 × 25 mm
Four profiles for multi-directional architectural curves
View Product & SpecificationsArchitectural LED Neon Flex
Compare free-bending, top-bend, side-bend and three-side emitting LED neon flex. Explore 11 models across four product groups, with profile dimensions, bend limits and cable exits matched to the architectural detail.
Architectural Neon Flex
Free-Bending LED Neon Flex
Follow changes in an architectural line with free-bending LED neon flex. Compare compact square, rounded and wide profiles, then match the minimum radius, light configuration and cable exit to the proposed route.
- 24 V DC standard
- 4 models
- −20 to 45°C
Free-Bending Product Group
4 models
Architectural Neon Flex
Top-Bend LED Neon Flex
Choose top-bend LED neon flex when the installation follows the bending plane shown in the model drawing. Compare a 6 × 6 mm profile, an 11 × 8.8 mm semicircular section and a 20 × 20 mm square section for the space available.
- 24 V DC standard
- 3 models
- −20 to 45°C
Top-Bend Product Group
3 models
Top-Bend LED Neon Flex
MODELS
NF0606 · NF1108 · NF2020
8–14 W/mWhite configurations
6 × 6 mm / 11 × 8.8 mm (semicircular) / 20 × 20 mm
Compact, semicircular and square profiles for top-bending paths
View Product & SpecificationsArchitectural Neon Flex
Side-Bend LED Neon Flex
Plan curved outlines in the side-bending plane with NFA-series LED neon flex. Choose a narrow 4 × 10 mm section, a 10 × 10 mm square profile or a taller 10 × 20 mm section, using the actual bend and fixing details to guide selection.
- 24 V DC standard
- 3 models
- −20 to 45°C
Side-Bend Product Group
3 models
Side-Bend LED Neon Flex
MODELS
NFA0410 · NFA1010 · NFA1020
8–14 W/mWhite configurations
4 × 10 mm / 10 × 10 mm / 10 × 20 mm
Three cross-sections for side-bending architectural lines
View Product & SpecificationsArchitectural Neon Flex
Three-Side Emitting LED Neon Flex
NF03025R uses a three-side emitting profile for architectural details where the illuminated surface remains visible from more than one side. Review the original product view and rounded 30 × 25 mm section before planning an exposed line of light.
- 24 V DC standard
- 1 model
- −20 to 45°C
Three-Side Emitting Product Group
1 model
Three-Side Emitting LED Neon Flex
MODELS
NF03025R
25 W/mWhite configurations
30 × 25 mm (rounded)
NF03025R · a 30 × 25 mm multi-face luminous profile
View Product & SpecificationsProduct Categories
Explore Our Architectural Lighting Range
Browse CRANE’s core architectural lighting categories for facade, exterior and landscape lighting applications.
LED Wall Washer Lights
Linear wall washing for facades, exterior walls and architectural surfaces.
Explore Category →LED Flood Lights
Powerful exterior illumination for facades, structures and landscape projects.
Explore Category →LED Linear Lights
Continuous linear lighting for architectural outlines, facade details and exterior structures.
Explore Category →LED Pixel / Point Lights
Dynamic point-source lighting for media facades, outlines and architectural effects.
Explore Category →Outdoor LED Strip Lights
Flexible linear lighting for coves, outlines and outdoor architectural details.
LED Inground / Underground Lights
Recessed exterior lighting for facades, pathways, landscapes and architectural accents.
Explore Category →APPLICATIONS
Architectural Uses to Evaluate.
Curved Outlines
Review the bending plane and radius along a canopy, feature edge or curved architectural line.
Recessed Details
Coordinate the profile, channel and cable exit with the recess. Leave access for connections and maintenance.
Visible Multi-Face Light
Use the NF03025R product view to review a detail where more than one emitting face is intended to remain visible.
SELECTION GUIDE
Three Checks Before Selecting Neon Flex.
Profile & Mounting Space
Compare the actual cross-section and its fixing accessory. The 6 × 6 mm NF0606, 4 × 10 mm NFA0410 and 50 × 25 mm NF05025 serve very different installation details.
Bend Radius & Cable Exit
Match the permitted bend plane and minimum radius to the drawn curve. Reserve space for the cable exit shown for the exact model.
Configuration & Feed Sections
Use the selected white or colour configuration for power and cut-length planning. A maximum connection run is not a roll length; coordinate separate feeds where needed.
FAQ
LED Neon Flex Selection Questions
How do I choose between free-bending, top-bend and side-bend neon flex?
Start with the required bending plane, then check the model-specific minimum radius. Use the original direction diagram to orient the emitting face correctly. Similar profile dimensions do not make the bending structures interchangeable.
Are all listed models IP67?
No. NF0606, NF1108, NFA0410 and NF03025R list IP65; the other selected models list IP67. Review the complete installation, including end seals and connections, for the actual environment.
Can I use the white-light output for an RGBW specification?
No. Each detail page separates the listed colour configurations. White flux is referenced to 3000 K, while RGB and RGBW rows use their own catalogue conditions and values.
What is different about three-side emitting neon flex?
NF03025R has a multi-face luminous profile shown in the original product image. It is a structural option, not an additional bending plane or a claim of a measured 270-degree viewing angle.
What should I send for a project quotation?
Include the profile space, route drawing, bending direction, run lengths, light configuration and feed locations. Add cable-exit and mounting requirements so the model can be reviewed with the installation detail.
START A PROJECT
Plan Your LED Neon Flex Layout.
Share the curve, installation section, run lengths and light requirements. Our team will review the applicable model and configuration with you.
