Product Family Datasheet
W High Output · 2 models
Preview specifications and dimensions for this product family. The PDF opens in a new tab; download from the preview.
Preview Datasheet
Original product and dimension references. Confirm the drawing for the required mounting or housing version before installation.
W Series · W High Output
Two models from 72–120 W for architectural lighting
Compare W220 and W220L as two W High Output models with different housing depths. Review the full drawing for the chosen version instead of relying on the shared front size when planning installation.
Project support: Review the model, beam, light colour and control for your installation.
Features & Specifications
Power, output and dimensions below follow the selected model.
W High Output contains W220 and W220L, two square floodlights with the same listed width but different housing depths. This difference matters at the mounting location.
Select the complete fixture envelope together with the required power and optical arrangement. A shared width does not make the two housings interchangeable.
Hood Options
Standard and hood references describe different physical versions. Include the chosen head version in the fixture schedule for the proposed installation.
Model Comparison
Compare the listed model differences, then use the corresponding installation reference. The model table is not a project lighting calculation.
| Specification | ||
|---|---|---|
| Power | 72–96 W (Customizable) | 100–120 W (Customizable) |
| Maximum Luminous Flux | 6,240 lm | 7,800 lm |
| LED Quantity | 36 pcs | 48 pcs |
| Dimensions Without Hood | 220 × 95 × 291 mm (W × D × H) | 220 × 135 × 307 mm (W × D × H) |
| Dimensions With Hood | 220 × 125 × 291 mm (W × D × H) | 220 × 175 × 307 mm (W × D × H) |
Review W220 using its own complete dimensions and the selected standard or hood drawing. Check the depth available at the proposed location.
For W220L, confirm the full housing depth and drawing version rather than reusing a W220 installation detail.
Optical Options
Choose from seven circular and elliptical optics for W High Output LED floodlights. Compare beam shapes and horizontal projection at 0°, with illustrative beam dimensions at 10 m.
Perpendicular target plane · Beam shape illustration
Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions.
Technical Documents
Product specifications and technical files for your lighting project.
W High Output · 2 models
Preview specifications and dimensions for this product family. The PDF opens in a new tab; download from the preview.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
FAQ
Questions about W High Output model selection, configuration boundaries and the references needed before specification.
This group includes W220 / W220L. Compare the listed power, output and housing dimensions, then review the mounting space, target geometry and required light-colour configuration.
Do not assume a direct replacement. W220 is listed at 220 × 95 × 290 mm, while W220L is listed at 220 × 135 × 307 mm; the W220 drawing also contains a 291 height label requiring confirmation. Compare approved drawings, mounting interfaces, the installation envelope and the electrical configuration before substituting either model. The L suffix does not establish a long-throw optic.
The current selection sheet gives AC85–265V / 50–60Hz as the model-level input listing. It does not assign separate supply voltages to every light-colour option. Confirm the input voltage, rated power, driver and control together for the required configuration; wattage alone does not identify it.
W High Output LED floodlights are available with five circular beam angles: 8° spot, 12° narrow, 25° medium, 45° wide and 60° extra wide. The elliptical options are 10° × 45° and 15° × 60°, listed as short-axis angle × long-axis angle. Select Horizontal or Vertical in the preview to compare the long-axis orientations. Specify W220 or W220L, the optic, light color and beam orientation when ordering.
Provide the preferred model, quantity, lighting target, available supply and installation space. Compare the original standard and hood drawing references where supplied, then request the approved drawing for the required version. A drawing or photograph does not establish a removable or included hood accessory.
Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions.
PROJECT SUPPORT
Identify W220 or W220L, the required housing version and available installation depth. Attach the corresponding drawing or site detail with the target surface and intended lighting effect.
CURRENT SELECTION · Selected Model: W220
Project-specific customization can be reviewed based on your requirements, including product configuration, housing finish, control method, optics and other feasible modifications.
Our team will review your project information, selected model and customization requirements, then follow up with the available product options.