Product Family Datasheet
V Round Floodlights · 4 models
Preview specifications and dimensions for this product family. The PDF opens in a new tab; download from the preview.
Preview Datasheet
Original product and dimension references. Confirm the drawing for the required mounting or housing version before installation.
V Series · V Round Floodlights
Four models from 120–300 W for architectural lighting
Explore four round V Series floodlights with U-bracket mounting. Compare V260, V300, V370 and V420 using their housing drawings and listed specifications, then review the selected model against your architectural lighting brief.
Project support: Review the model, beam, light colour and control for your installation.
Features & Specifications
Power, output and dimensions below follow the selected model.
The V Series pairs a round housing with a U-bracket across four fixture sizes. This format suits projects that need a directional floodlight with a visible mounting bracket.
Housing dimensions and available power change with the model. Choose the fixture envelope alongside the intended mounting position rather than treating the four sizes as interchangeable.
Select the beam and light configuration for the surface being lit. The bracket position and viewing direction should be considered together in the project layout.
Model Comparison
Compare the listed model differences, then use the corresponding installation reference. The model table is not a project lighting calculation.
| Specification | ||||
|---|---|---|---|---|
| Power | 120–150 W (Customizable) | 150–200 W (Customizable) | 180–240 W (Customizable) | 240–300 W (Customizable) |
| Maximum Luminous Flux | 9,750 lm | 13,000 lm | 15,600 lm | 19,500 lm |
| LED Quantity | 24 pcs | 24 pcs | 36 pcs | 48 pcs |
| Dimensions | Ø265 × D145 × H365 mm | Ø300 × D145 × H396 mm | Ø370 × D166 × H446 mm | Ø420 × D170 × H499 mm |
Check the V260 drawing against the available mounting space before comparing its listed output with the project requirement.
Compare V300 with the neighbouring V models using both the housing drawing and specification column; do not transfer dimensions between models.
Review V370 with the proposed supporting surface and fixture position shown on the project drawing.
For V420, confirm the space for the full housing and bracket. A larger model number does not replace a configuration-specific lighting review.
Optical Options
Compare circular and elliptical beam shapes for V Round LED floodlights. View horizontal projection at 0° and estimated coverage at 10 m.
Perpendicular target plane · Beam shape illustration
Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions.
Technical Documents
Product specifications and technical files for your lighting project.
V Round Floodlights · 4 models
Preview specifications and dimensions for this product family. The PDF opens in a new tab; download from the preview.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
FAQ
Questions about V Round Floodlights model selection, configuration boundaries and the references needed before specification.
This group includes V260 / V300 / V370 / V420. Compare the listed power, output and housing dimensions, then review the mounting space, target geometry and required light-colour configuration.
The current selection sheet lists a power range for each model, rather than assigning a separate rated power to every light colour. Confirm the actual input power, driver and output for the required V model, light colour and optic. Maximum listed output is not a guarantee for every configuration.
No. The LED quantity column lists 24 / 24 / 36 / 48 pcs for V260 / V300 / V370 / V420. Separate optical configurations list Ø45 mm and Ø24 mm optics with their own LED counts. Keep the chosen optic and LED count together.
The table lists DMX512 + Wireless Control for RGBW and RGB only. Dual CCT is listed with DMX512; Static White with DMX512, ON-OFF or ON-OFF-DALI; Single Color with ON-OFF.
Dual CCT allows any two CCT values within 2700–6000 K. Static White allows any one CCT within that range. Single Color selects one of White, Red, Green, Blue or Amber; it does not mean switching between all available single-color options.
The page follows the model drawings: V260 is Ø265 × D145 × H365 mm, and V420 is Ø420 × D170 × H499 mm. The V420 drawing also labels 425 mm body height, which is separate from overall height. Check the illustrated position and mounting clearance before installation.
Beam shapes and dimensions are illustrative, not measured photometric data. Actual results depend on the selected optics, luminaire configuration, and installation conditions. IP66 and IK10 are listed product specifications. Check the applicable certification documents for the exact model and configuration.
Include V260, V300, V370 or V420, the target dimensions and mounting location, the required light color, beam and supported control combination. Include the intended optical configuration and review the drawing-defined dimensions and installation clearance.
The circular beam angles are 8°, 12°, 25°, 45° and 60°. The elliptical options are 10° × 45° and 15° × 60°, listed as short-axis angle × long-axis angle. Select the long-axis orientation in the preview to see the horizontal and vertical angles. Confirm the optic for the selected model and light-color configuration.
PROJECT SUPPORT
Share the V model you are considering, the target surfaces and proposed U-bracket mounting locations. Include an elevation or site image and the intended light-colour and control requirements.
CURRENT SELECTION · Selected Model: V260
Project-specific customization can be reviewed based on your requirements, including product configuration, housing finish, control method, optics and other feasible modifications.
Our team will review your project information, selected model and customization requirements, then follow up with the available product options.