Original photograph shows a body detail, not the complete 1000 mm luminaire. The model-specific drawing identifies its profile.
MDY Series · MDY Slim
Three narrow profiles for linear in-ground lighting.
MDY Slim groups three narrow aluminium profiles for linear LED in-ground lighting. Compare their cross-sections when coordinating a recessed line of fixtures with an architectural detail. The model drawings identify the profile geometry, while the project detail establishes the space and connections needed for installation.
Project support: Share the model, recess detail, light requirements and project supply.
Features & Specifications
Specifications follow the selected model.
Model Comparison
Compare the three Slim profiles by their documented cross-sections and listed model configurations.
| Specification | |||
|---|---|---|---|
| Power | 12 W / 18 W / 24 W | 12 W / 18 W / 24 W | 12 W / 18 W / 24 W |
| Luminaire Dimensions | L1000 × body W26 × profile H45 mm | L1000 × body W30 × profile H47 mm | L1000 × body W30 × profile H52 mm |
| Installation Opening (L × W × H) | 1000 × 26 × 45 mm | 1000 × 30 × 47 mm | 1000 × 30 × 52 mm |
| Body width | 26 mm | 30 mm | 30 mm |
| Total profile height | 45 mm | 47 mm | 52 mm |
| Light Source | OSRAM LED | OSRAM LED | OSRAM LED |
| Outer Carton Dimensions (L × W × H) | 103 × 26 × 30 cm | 103 × 26 × 30 cm | 103 × 26 × 30 cm |
| Kit Weight | 1.5 kg | 1.5 kg | 1.5 kg |
MDY Slim / Optics
Compare narrow, wide, elliptical and asymmetric optics for the 26–30 mm MDY Slim profile.
10° · Concentrates uplight on the stone pier and picks out the underside of the cornice.25° · Lights the lower pier with a softer edge and a wider spread than the 10° spot.40° · Spreads light across the base of the stone bay, with a softer glow higher up the wall.60° · Keeps the brightest part of the beam close to the paving, accenting the foot of the wall.20° × 55° · The elliptical beam spreads 55° along the fixture and 20° across it, extending the accent along the wall.27° × 70° · The 70° spread follows the fixture length. The asymmetric 27° section directs more light toward the wall.19° × 38° · A 5° optical offset directs the beam toward the masonry from a level recessed fixture.
Share your MDY Slim model, wall setback and target area to request matching photometric data.
Request Optical Data →Applications
Illustrative uses of MDY Slim for recessed linear lighting beside building bases, landscape walls and entrance piers.
MDY Slim can be considered for narrow recessed runs beside a building base. Separate linear positions can add a ground-level accent to selected façade surfaces.
AI-generated application illustration. Not a completed CRANE project.
Narrow linear positions beside a landscape wall can create a distinct lighting layer. Consider the Slim profiles where a narrow recessed architectural detail is required.
AI-generated application illustration. Not a completed CRANE project.
Short recessed linear runs beside entrance piers can accent their vertical surfaces. Compare the Slim profiles with the available space at the base of each feature.
AI-generated application illustration. Not a completed CRANE project.
Technical Documents
Product specifications and technical files for your lighting project.
MDY Slim · 3 models
Preview specifications and dimensions for this product family. The PDF opens in a new tab; download from the preview.
Preview DatasheetProject-specific documentation
IES / LDT photometric files, installation guidance and CAD drawings can be requested from our product selection team.
Request Technical FilesBrowse available certificates and check the product and model scope in each document.
Related Series
Compare other product groups in this series. View all MDY Series →
12–48 W · Six non-flanged profiles for comparison within the MDY range.
View Product →
12–48 W · Five linear profiles with separate body and face-flange dimensions.
View Product →
12–48 W · Four deeper non-flanged housing profiles.
View Product →
12–48 W · Three deeper housing profiles with wider face flanges.
View Product →Related Products
Compare products from other series, including round and linear formats. Review each product's dimensions, light source and installation requirements; these are not direct replacements.
6–24 W · Larger MA round uplights with separate mounting sleeves.
View Product →
3–12 W · A shallow body format with four round face sizes.
View Product →
3–18 W · Four smaller round housing models within the MC Series.
View Product →
3–36 W · Discrete LED and COB source configurations on selected models.
View Product →FAQ
Selection, installation and documentation questions for MDY Slim.
MDY Slim groups the narrower Slim cross-sections, while MDY Standard provides a separate set of non-flanged profiles. Compare the actual width and height of each candidate rather than relying on the group names alone.
No. Body width describes the product profile. The installation detail must also establish mounting, clearance, cables and drainage for the selected fixture.
MDY Slim can be configured with 10°, 25°, 40°, 60°, 20° × 55°, 27° × 70° or 19° × 38° optics. Select the spread for the wall pier or facade detail, then confirm the optic and LED arrangement for your chosen narrow profile.
No such suitability is claimed here. The listed IP67 · IK10 rating is not a vehicle-load or submersible installation approval. Share the site exposure and mounting conditions for review.
Send a plan showing the run and fixture positions, plus a section showing the recess and surface finish. Add the quantity, required light appearance and selected profile, if known.
PROJECT SUPPORT
Send the intended lighting run and a section of the narrow recess. Include your preferred MDY Slim profile, quantity, light appearance and connection layout.
CURRENT SELECTION · Selected Model: MDY-D2645-49
Our team will review your model, requested configuration and installation requirements, then follow up with the available options.
